cnPilot e425H wall plate


Cambium Networks cnPilot e425H wall plate

The Cambium Networks cnPilot™ e425H enterprise class indoor wall plate access point supporting 802.11ac Wave 2 standards based beamforming, is perfect for hotels and resorts, multi-dwelling units (MDUs) or just about any place indoor that needs a wall mounted AP with multiple Gig E ports to drive indoor Wi-Fi and wired port network access managed via portals.

Add to Wishlist
Add to Wishlist

Cambium Networks wall plate access points (AP) put personal Wi-Fi in the room where people and devices connect. Designed for discreet installation on a flat wall surface or over a wiring box. Both of these high-powered wall plate AP’s include enterprise-grade seamless roaming, automated RF control, beamforming and the latest 802.11ac Wave 2 technology.


Radios1 x 5 GHz radio (802.11a/n/ac Wave 2), 2×2
1 x 2.4 GHz (802.11b/g/n), 2×2
SU-MIMO / MU-MIMO: 2 streams
Wi-Fi802.11 a/b/g/n/ac Wave 2
SSID SecurityWPA2 (802.11i), WPA2 Enterprise (802.1x/EAP), WPA PSK, Open
Max PHY Rate2.4 GHz radio: 300 Mbps, 5 GHz radio: 867 Mbps
EthernetThree IEEE Gigabit Ethernet auto sensing
AntennaInternal omni-directional
2.4 GHz: 4 dBi
5 GHz: 4 dBi
Max EIRP2.4 GHz: 25 dBm
5 GHz: 27 dBm
(EIRP limited by country regulations)
WLAN100 clients, 16 SSIDs
WPA-TKIP, WPA2 AES, 802.1x, 802.11w PMF
Power802.3af or 802.3at powered device
Typical load, no power out: 8 W
Typical load, with 15.4 W power out: 25 W
Power out: 15.4 W when input is 802.3at
MTBF249k @ 40c
Dimensions147 mm x 94 mm x 32 mm
Weight268 g
SecurityKensington lock slot, secure bracket
LEDsTri-color status LEDs
Ambient Operation
0 C to 40 C
Storage Temperature-40 C to 70 C
Humidity95% RH non-condensing
Wi-Fi Alliance 80211 a/b/g/n/ac,
PP2.0 FCC, ETSI, CE, EN 60601-1-2, IEC60950
Source: Cambium
Compatible with other Cambium products